HATE Senn-Miller Retractor – Double-Ended, 3 Prongs & Blade

The HATE senn miller retractor is a German-made double-ended retractor with a three-prong rake on one end and a thin, L-shaped blade on the other, joined by a smooth, balanced handle. It gives the surgeon two retractors in one for skin and soft-tissue retraction in small surgical fields.

What Is a Senn Miller Retractor?

The Senn-Miller retractor (also called a Senn or Senn-Mueller retractor) is one of the most widely used hand-held retractors. Its two working ends face opposite directions: a small rake with three curved prongs that grips the skin edge, and a flat, angled blade that slides under the tissue for smooth, broad retraction. The surgeon or assistant switches between them simply by turning the instrument in the hand.

Standard models are about 16 cm long, with a prong end about 7 mm wide and a blade of about 5 x 18 mm.

Learn more on Wikipedia: Retractor (medicine).

Features of the HATE Senn Miller Retractor

• 3-prong rake end: secure grip on skin and subcutaneous edges.
• L-shaped blade end: smooth, broad retraction without catching tissue.
• Double-ended design: two retractors in one instrument.
• Balanced handle: light, comfortable and easy to turn in the hand.
• Made in Germany: manufactured by HATE from German surgical stainless steel.
• Reusable: can be cleaned and autoclaved between procedures.

Clinical Uses of the Senn Miller Retractor

The senn miller retractor is suitable for:

• Skin and subcutaneous retraction in plastic and reconstructive surgery.
• Hand and foot surgery and small joint exposure.
• Thyroid, neck and soft-tissue procedures.
• Scar revision, lesion excision and wound closure.

Why Choose a Double-Ended Retractor?

In small surgical fields, the surgeon often needs a rake one moment and a smooth blade the next. A double-ended retractor puts both on one instrument, so there is no need to reach for another tool. This keeps the tray simple, saves time and lets the assistant adapt the retraction quickly as the dissection moves deeper. The light weight of the senn miller retractor also reduces fatigue during long procedures.

How to Use the Senn Miller Retractor

1. Choose the end you need: the rake for gripping skin edges, the blade for broad, smooth retraction.
2. Place the working end under the wound edge and apply gentle, steady traction.
3. Turn the instrument in the hand to switch ends as the procedure requires.
4. Avoid excessive force on thin skin and flaps.

German Quality from HATE

HATE is a German manufacturer of surgical instruments with a strong focus on plastic, aesthetic and reconstructive surgery. Each instrument is forged or machined from high-grade material, hand-finished and checked by experienced instrument makers before it leaves the factory. The result is an instrument with a precise working end, a smooth surface that is easy to clean and a long working life when it is cared for correctly. Surgronic supplies the full HATE range to hospitals, private clinics and surgeons in Türkiye and abroad, with fast delivery and support from a team that knows surgical instruments.

Care and Sterilization

Rinse the retractor immediately after use. Clean the prongs and the blade with a soft brush or in an ultrasonic cleaner, then dry it completely. Sterilize it in an autoclave according to your facility’s validated protocol. Inspect the prongs before every use and protect them during storage.

Specifications

• Brand: HATE (Germany)
• Model: Senn-Miller Retractor
• End 1: 3 curved prongs
• End 2: L-shaped blade
• Overall length: 16 cm
• Material: German surgical stainless steel
• Reusable: yes, autoclavable

Senn Miller Retractor FAQ

Is it the same as a Senn retractor?

Yes. Senn, Senn-Miller and Senn-Mueller are names for the same double-ended design.

Are the prongs sharp or blunt?

Sharp prongs grip skin firmly; blunt prongs are gentler near vessels and nerves.

Is it supplied sterile?

No. Clean and sterilize the retractor before first use.

Browse all HATE instruments in the Surgronic shop.