Micromotor Drill Tip 1 mm – Round Bur for Micromotor Handpieces

This micromotor drill tip has a fine 1 mm round head for precise, controlled work with a surgical micromotor handpiece. Its slim profile and straight, balanced shank give the operator a clear view of the working area and smooth rotation at the speeds micromotor systems are designed for.

What Is a Micromotor Drill Tip?

A micromotor drill tip, often called a bur, is the rotating cutting attachment that fits into the handpiece of a micromotor device. The motor drives the handpiece, and the tip does the actual work. The size and shape of the head decide how much material is removed and how fine the result is. A small round head like this one is chosen when accuracy matters more than speed.

You can read more about how burs work and the different head shapes on Wikipedia’s overview of burrs.

Features of the 1 mm Micromotor Drill Tip

• 1 mm round head: small working diameter for fine, controlled cutting in tight areas.
• Straight, balanced shank: helps keep rotation stable and reduces vibration in the handpiece.
• Slim neck: keeps the working field visible while you work.
• Durable steel construction: built to hold its shape through repeated use.
• Reusable: can be cleaned and sterilized between procedures.

Compatibility

This micromotor drill tip is designed for straight micromotor handpieces that accept a standard shank. Before ordering, check that the shank diameter listed in the specifications below matches your handpiece’s chuck. If you are not sure, contact us with your handpiece model and we will confirm the fit.

How to Use

1. Check the tip: inspect the head and shank for damage or wear before every use.
2. Insert fully: push the shank all the way into the handpiece chuck and lock it as the manufacturer describes.
3. Test run: run the micromotor briefly at low speed to confirm the tip spins true, without wobble.
4. Work at the right speed: follow the speed range recommended for your handpiece and procedure, and use irrigation where required.
5. Clean after use: remove the tip, clean it and sterilize it before the next procedure.

Cleaning and Sterilizing Your Micromotor Drill Tip

Remove debris straight after use with a soft brush or an ultrasonic cleaner, then rinse and dry the tip completely. Sterilize it according to your facility’s protocol for rotary instruments. Replace the tip as soon as the head looks worn, chipped or blunt, because a dull bur produces more heat and less precise results.

Why Buy from Surgronic?

Surgronic supplies surgical instruments and accessories to clinics and practitioners. Every micromotor drill tip is checked before shipping, and our team can help you choose the right size for your procedure. Browse our full range of surgical instruments and accessories to complete your setup.

المواصفات

• Tip diameter: 1 mm
• Head shape: Round
• Material: [confirm, e.g. surgical stainless steel]
• Shank diameter: [confirm, e.g. 2.35 mm]
• Total length: [confirm, e.g. 44 mm]
• Compatible with: straight micromotor handpieces
• Quantity: 1 piece

Micromotor Drill Tip FAQ

Will this drill tip fit my handpiece?

It fits handpieces that accept the shank diameter listed in the specifications. Send us your handpiece model if you would like us to check.

Can the tip be sterilized and reused?

Yes. Clean it thoroughly after each use and sterilize it according to your facility’s protocol for rotary instruments.

When should I replace the bur?

Replace it when the head looks worn or chipped, or when cutting needs noticeably more pressure than before.

Do you offer other sizes?

Contact us for the sizes we have available, or browse our shop for other micromotor accessories.

Important Safety Information

This instrument is intended for use by trained professionals only. Always wear appropriate protective equipment, follow your handpiece manufacturer’s speed recommendations, and never use a bent, damaged or worn tip.