HATE Sterilization Tray – Instrument Tray with Silicone Mat

The HATE sterilization tray is an instrument tray with a soft pin mat, drainage and steam holes and side openings for handling. It holds delicate surgical instruments securely in place and protects their tips and edges during cleaning, steam sterilization, transport and storage.

What Is a Sterilization Tray?

A sterilization tray keeps a set of instruments together and protected from the moment they leave the operating room until they are used again. The pins of the mat hold each instrument slightly above the base, so the tips do not touch each other or the tray. This prevents damage to fine points and cutting edges, and lets steam reach every surface during the autoclave cycle.

The holes in the base let water drain out after cleaning and let steam circulate during sterilization. The tray is then wrapped or placed in a sterilization container according to your facility’s protocol.

Learn more on CDC: Steam Sterilization.

Features of the HATE Sterilization Tray

• Soft pin mat: holds instruments in place and protects their tips.
• Steam and drainage holes: good steam penetration and fast drying.
• Side openings: easy to lift and handle.
• Bright yellow colour: easy to identify in the sterile processing area.
• Smooth, rounded edges: safe handling and easy cleaning.
• Reusable: designed for repeated cleaning and sterilization cycles.

Clinical Uses of the Sterilization Tray

The sterilization tray is suitable for:

• Storing and protecting microsurgery and plastic surgery instruments.
• Holding a dedicated instrument set during steam sterilization.
• Transporting instruments between the OR and sterile processing.
• Organising delicate instruments such as hooks, scissors and forceps.

Why Protect Instruments in a Dedicated Tray?

Fine instruments are expensive, and most damage happens outside the operating room: when instruments are piled together, tips bend, edges get nicked and alignment is lost. A sterilization tray with a pin mat keeps every instrument separate and still. This extends the life of your instruments, reduces repair costs and makes it easy to check that a set is complete before surgery.

How to Use the Sterilization Tray

1. Place clean, dry instruments on the pin mat, with hinged instruments open.
2. Avoid stacking instruments on top of each other.
3. Wrap the tray or place it in a sterilization container according to your protocol.
4. Sterilize in a steam autoclave within the temperature limits given by the manufacturer.

German Quality from HATE

HATE is a German manufacturer of surgical instruments with a strong focus on plastic, aesthetic and reconstructive surgery. Each instrument is forged or machined from high-grade material, hand-finished and checked by experienced instrument makers before it leaves the factory. The result is an instrument with a precise working end, a smooth surface that is easy to clean and a long working life when it is cared for correctly. Surgronic supplies the full HATE range to hospitals, private clinics and surgeons in Türkiye and abroad, with fast delivery and support from a team that knows surgical instruments.

Care and Sterilization

Clean the tray and mat after each use with a neutral detergent and a soft brush, rinse well and let them dry completely. Do not use abrasive cleaners or sharp tools on the mat. Inspect the mat regularly and replace it if the pins are torn or hardened.

المواصفات

• Brand: HATE
• Model: Sterilization Tray
• Mat: soft pin mat
• Base: perforated for steam and drainage
• Sterilization: steam autoclave
• Reusable: yes

Sterilization Tray FAQ

Can the tray go in the autoclave?

Yes, it is designed for steam sterilization.

Which instruments fit?

Most plastic surgery and microsurgery instruments.

Browse all HATE instruments in the Surgronic shop.