HATE Face-Lift – Lighted Facelift Retractor

The HATE Face-Lift is a German-made facelift retractor with a wide, curved blade and a built-in fiber-optic light channel. It lifts and holds the skin flap while lighting the dissection pocket from the inside, giving the surgeon a bright, shadow-free view deep under the flap where headlights and overhead lamps cannot reach.

What Is a Lighted Facelift Retractor?

During a facelift, the surgeon raises a large skin flap over the cheek and neck and works in a tunnel-like space beneath it. Overhead lights only illuminate the entrance of that space. A lighted retractor solves this problem: a light guide runs along the blade and carries light from a standard fiber-optic cable directly to the tip, so the deepest part of the dissection is clearly visible while the blade holds the flap up.

You can read more about the facelift procedure on the American Society of Plastic Surgeons website.

Features of the HATE Face-Lift Retractor

• Built-in light channel: brings light to the tip of the blade for a clear view under the flap.
• Fiber-optic connector: connects to a standard surgical light cable and light source.
• Wide, curved blade: lifts and holds large skin flaps evenly with less pressure on the tissue.
• Curved, open handle: a comfortable grip for the assistant during long procedures.
• Made in Germany: manufactured by HATE to German surgical instrument standards.
• Reusable: can be cleaned and autoclaved between procedures.

Why Use a Fiber Optic Retractor in Facelift Surgery?

Good visibility is the key to safe facelift dissection. In the deep part of the flap, the surgeon must identify fine blood vessels and stay clear of facial nerve branches. A fiber optic retractor puts light exactly where it is needed, reduces shadows from the surgeon’s own hands and instruments, and lets the assistant retract and illuminate with one instrument. The result is better haemostasis, more accurate dissection and less time spent adjusting lights.

Clinical Uses

This facelift retractor is suitable for:

• Facelift (rhytidectomy) and SMAS procedures
• Neck lift and platysmaplasty
• Breast surgery and other procedures with deep, tunnel-like dissection pockets
• Plastic and reconstructive surgery where lighted retraction is needed

How to Use the Facelift Retractor

1. Connect the light: attach a compatible fiber-optic light cable to the connector and switch on the light source.
2. Insert: slide the blade under the skin flap with the light channel facing the dissection area.
3. Retract: lift the flap gently and evenly by the handle to open the pocket.
4. Adjust: reposition the blade as the dissection moves forward to keep the working area lit.

Cleaning and Sterilization

Disconnect the light cable and rinse the facelift retractor immediately after use. Clean the blade and the light channel carefully with a soft brush, avoiding anything that could scratch the light guide. Clean the connector and dry the instrument thoroughly. Sterilize according to your facility’s validated protocol and the manufacturer’s instructions for fiber-optic instruments. Inspect the light guide before every use for damage that could reduce light output.

Why Buy from Surgronic?

Surgronic supplies genuine HATE surgical instruments to clinics, hospitals and plastic surgeons. Every HATE facelift retractor is inspected before shipping, and our team can help you choose a compatible light cable and build a complete facelift set. Browse our full range of plastic surgery instruments.

المواصفات

• Brand: HATE
• Country of origin: Germany
• Model: Face-Lift
• Type: Lighted facelift retractor with fiber-optic light channel
• Blade width: [confirm]
• Blade length: [confirm]
• Light connector: [confirm, e.g. Storz, Wolf or ACMI compatible]
• Material: German surgical stainless steel
• Reusable: Yes
• Supplied: Non-sterile, without light cable

Facelift Retractor FAQ

Is a light cable included?

No. The retractor is supplied without a light cable. Use a compatible fiber-optic cable and light source.

Which light cables are compatible?

See the light connector listed in the specifications. Contact us with your light source brand and we will confirm compatibility.

Can it be autoclaved?

Yes. Clean it carefully first, then sterilize it following your facility’s protocol and the manufacturer’s instructions.

Is it supplied sterile?

No. Clean and sterilize the instrument before its first use.

Important Safety Information

This instrument is intended for use by trained medical professionals only. Fiber-optic light can produce heat at the tip, so do not leave the lit blade resting on skin or drapes for long periods, and always follow the instructions for your light source.